How to Secure Your Camera with Adhesive Putty for Flatlay Shots

Quick answer

Use a reusable, residue-free adhesive putty like the Lens-Aid white putty to temporarily hold your camera in position for flatlay shots without damaging surfaces.

Step-by-step: Secure your camera with adhesive putty

1. Prepare the surface and putty: Clean the area where the camera will sit. Roll a small piece of putty into a ball about the size of a pea—using too much makes removal harder. Check the surface is dust-free; a quick wipe with a microfiber cloth is enough.
2. Attach putty to the camera base: Press the putty ball onto the flat bottom of your camera. Flatten it slightly so it grips evenly. Do not cover tripod threads if you plan to switch mounts later. Avoid getting putty into the battery compartment or lens mount area.
3. Position and press down: Place the camera onto the flatlay surface at your desired angle. Apply gentle, even pressure for about 10 seconds to set the bond. The camera should stay put when you let go. If the camera slides, the putty amount may be too small or the surface too textured—add a second ball.
4. Remove and store putty: Lift the camera straight up—do not twist. Peel the putty off the base and roll it back into a ball. Store it in a sealed bag to keep it clean and reusable. If any residue remains, a dry microfiber cloth will lift it off without solvents.

Product facts

• Weiße Klebeknete 96 Stück – wiederverwendbar & rückstandsfrei: The Lens-Aid white putty is reusable, residue-free, and designed for studio photography settings. You can reposition the camera multiple times without leaving sticky marks or damaging your backdrop.